ARRI NIA-1 Network Interface Adapter (Set of 2)

ARRI NIA-1 Network Interface Adapter Set (2x) for LBUS to Ethernet Conversion The ARRI Network Interface Adapter NIA-1 Set fundamentally changes how camera crews manage lens and camera control on complex sets. It addresses the inherent distance limitations of standard LBUS cables by seamlessly converting the LBUS protocol into a robust, IP-based Ethernet signal. This allows camera assistants, DITs, and remote operators to run lens and camera controls over hundreds of meters using standard, cost-effective network infrastructure, eliminating signal degradation issues associated with excessively long, daisy-chained cables. This package includes a set of two NIA-1 adapters, providing a complete point-to-point solution straight out of the box. Place one adapter at the camera, connecting your LBUS motors, and the other at your remote station with an LBUS hand unit like the OCU-1. With versatile power options, including Power over Ethernet (PoE) or power from the camera’s LBUS port, the NIA-1 integrates effortlessly into any professional ARRI camera ecosystem. It’s the definitive solution for achieving reliable, long-distance camera control in demanding environments like car rigs, large-scale virtual production stages, and live events. Key Features LBUS to Ethernet Bridge: Perfectly converts ARRI LBUS signals to a standard TCP/IP Ethernet stream and back, preserving all lens data and control commands with minimal latency. Extended Control Range: Break free from the 10-20 meter limitations of LBUS cables. Utilize standard Ethernet cabling to extend control up to 100 meters per segment, or even further with network switches. Dual Powering Options: Offers operational flexibility by accepting power from the camera’s LBUS connection or via Power over Ethernet (PoE), simplifying cable management on complex builds. Integrated CAM Port: A 10-pin LEMO CAM connector provides power passthrough and enables camera Run/Stop triggering, integrating core camera functions into the remote workflow. Complete Set of Two: This kit includes two NIA-1 adapters, giving you everything needed for a direct point-to-point connection without requiring separate purchases. Robust & Compact Build: Engineered with a durable, lightweight housing, the NIA-1 is built to withstand the rigors of daily on-set production environments. Network Integration: Allows LBUS-compatible devices like cforce motors and the OCU-1 to become endpoints on a network, opening up possibilities for advanced DIT and virtual production workflows. Plug-and-Play Simplicity: Designed for immediate use, the adapters automatically connect when linked, requiring no complex network configuration for a standard point-to-point setup. Why ARRI NIA-1 Set (2x) Is Better The ARRI NIA-1 set represents a significant workflow improvement over traditional on-set control methods. While long LBUS cables offer a direct solution, they suffer from signal degradation, potential damage, and physical cumbersomeness over extended distances. The NIA-1 bypasses these issues entirely by leveraging the stability and ubiquity of Ethernet. Unlike proprietary wireless systems that can be prone to interference and latency in crowded RF environments, the NIA-1 provides the rock-solid reliability of a wired connection. This allows DITs and ACs to integrate camera and lens control directly into a production’s network infrastructure, a capability previously unavailable for LBUS-native devices, resulting in cleaner setups and more dependable performance. Advantages For 1st Assistant Cameras & Focus Pullers: * Achieve precise lens control from a video village or remote station without latency concerns. * Execute complex focus, iris, and zoom pulls on car rigs, jibs, and drones where physical proximity is impossible. * Simplify your camera build by replacing multiple long, heavy LBUS cables with a single, lightweight Ethernet cable. For Digital Imaging Technicians (DITs): * Integrate full lens and camera control directly into your networked DIT cart. * Manage and monitor multiple cameras from a central location over a standard network switch. * Streamline data and control workflows in virtual production environments. For Rental Houses & Production Companies: * Offer clients a modern, reliable solution for long-distance camera control. * Future-proof your equipment inventory for the increasing prevalence of IP-based on-set workflows. * Reduce wear and tear on expensive, proprietary LBUS cables. Best Suitable For Digital Imaging Technicians (DITs): Because it allows for seamless integration of camera and lens control into their networked workstations. 1st Assistant Cameras (ACs): Because it provides a reliable, long-distance solution for remote focus pulling on large sets, cranes, or vehicle rigs. Virtual Production Crews: Because it enables camera and lens functions to be controlled over the same network infrastructure used for tracking and data. Multi-Camera Live Event Operators: Because it simplifies the centralization of control for multiple ARRI cameras spread across a venue. Drone and Gimbal Technicians: Because it facilitates a hard-wired, interference-free control link over long tethers. FAQs – ARRI NIA-1 Network Interface Adapter (Set of 2) Q: Why does this product come as a set of two? A: You need two NIA-1 adapters for a complete point-to-point connection. One unit converts the LBUS signal to Ethernet at the camera end, and the second unit converts it back from Ethernet to LBUS at the operator’s end. Q: What is the maximum control distance I can achieve with the NIA-1 set? A: Using a standard Cat6 Ethernet cable, you can achieve a distance of up to 100 meters (328 feet). This range can be extended further by using network switches. Q: Can I power the NIA-1 from my camera? A: Yes, the NIA-1 can draw power directly from the camera’s LBUS or CAM port, eliminating the need for a separate power source for the adapter. Q: Does this set include LBUS or Ethernet cables? A: No, this set includes the two NIA-1 adapter units only. All LBUS, CAM, and Ethernet cables must be purchased separately to suit your specific setup needs. Q: Is the NIA-1 compatible with the ARRI OCU-1 or Master Grips? A: Absolutely. You can connect an OCU-1 or Master Grips to one NIA-1, and your lens motors to the other, to achieve long-distance remote operation. Q: What is Power over Ethernet (PoE)? A: Power over Ethernet allows the NIA-1 to receive power through the same Ethernet cable that transmits data, which is useful when using PoE-capable network switches and can simplify cabling. Q: Can I use the NIA-1 to control a cforce mini motor? A: Yes, the NIA-1 is fully compatible with the cforce mini, cforce plus, and other ARRI LBUS lens motors. Q: Is this a wireless device? A: No, the NIA-1 is a wired solution that uses Ethernet cables. It is designed for maximum reliability and zero interference, which wired connections provide. Q: Can I connect more than two NIA-1 adapters on a network? A: Yes, you can integrate multiple NIA-1 units into a larger network using switches to control multiple cameras or devices from one or more locations. Q: What does the CAM port do? A: The 10-pin CAM port allows you to connect to the camera for two main functions: drawing power and triggering the camera’s Run/Stop (record) function. Q: Is the NIA-1 weather-resistant? A: The NIA-1 features a rugged aluminum construction suitable for professional film sets. While it is durable and can withstand minor splashes, it is not fully waterproof and should be protected from heavy rain. Q: What’s the main advantage of this over just using a very long LBUS cable? A: The primary advantages are signal integrity and flexibility. LBUS signals degrade over long distances, while Ethernet maintains signal quality up to 100m. Ethernet cables are also cheaper, more readily available, and allow you to use existing network infrastructure on set. Q: Does the NIA-1 introduce any noticeable latency? A: The NIA-1 is engineered for extremely low latency, ensuring that control inputs from your hand unit are translated into motor movements almost instantaneously, which is critical for professional focus pulling. Set of two Network Interface Adapter NIA-1 and RRA-1 brackets. includes: K2.0052389 2x Network Interface Adapter NIA-1 K2.0053976 2x Rotary Release Adapter RRA-1